Skip to content

How To Remove Headliner

Headliner removal can be a tricky process, but with a little patience and the right tools, it can be done relatively easily. The first step is to remove any trim pieces or molding that might be in the way. Once those are out of the way, you can start to loosen the headliner fabric from its adhesive. This can be done with a putty knife or a flathead screwdriver. Be careful not to damage the headliner fabric as you’re removing it. Once the fabric is loose, you can start to peel it away from the adhesive. If the adhesive is stubborn, you can use a heat gun or hair dryer to help loosen it. Once the headliner is removed, you can clean up the adhesive

3 Steps to Remove Headliner

The most common method is to start at the front of the headliner and gently pull it down, being careful not to tear it. Some headliners are attached with Velcro or snaps, so it may be necessary to remove these before pulling the headliner down. Once the headliner is down, it can be removed from the vehicle by gently pulling it out through the door or sunroof opening.

The headliner is an important part of the car’s interior, and it can be expensive to replace. Learning how to remove it can save you money and time. It’s also a good skill to have if you’re considering installing a new headliner.

Step 1: Remove Screws

The first step is to remove the screws that are holding the headliner in place. You will need to remove the screws from the front and back of the headliner. Once the screws are removed, you can gently pull the headliner down and away from the vehicle.

Step 2: Lift Off Liner

The final step is to remove the headliner. This can be done by removing the screws that hold it in place and gently pulling it down. Be careful not to damage the headliner or the ceiling as you remove it. Once the headliner is removed, you can access the screws that hold the liner in place. Remove these screws and gently pull the liner down.

Step 3: Pull Out Staples

To remove a headliner, one must first pull out any staples that may be holding it in place. This can be done with a simple screwdriver or a pry bar. Once all of the staples are removed, the headliner can be pulled down and away from the vehicle.

Frequently Asked Questions

How Long Does It Take To Remove A Headliner?

The amount of time it takes to remove a headliner depends on a number of factors, including the type of adhesive used and the condition of the headliner. Generally, however, it can take anywhere from a few hours to a few days to remove a headliner.

How Do You Remove A Car Headliner?

There are a few ways to remove a car headliner. One way is to use a screwdriver to pry the headliner away from the windshield. Another way is to cut the headliner with a sharp knife.

How Do You Remove Old Headliner Glue?

There are many ways to remove old headliner glue, but the most common is to use a solvent. You can use a solvent such as lacquer thinner, acetone, or xylene. You can also use a heat gun to soften the glue.


Removing a headliner is a task that can be accomplished by most do-it-yourselfers. The process generally involves removing screws or clips that hold the headliner in place, then gently pulling it down. There may be some adhesive present, which can be removed with a suitable solvent.

Leave a Reply

Your email address will not be published. Required fields are marked *