Coilovers are a type of suspension that allows for adjustable ride height. To adjust the height of your coilovers, you will need to measure the distance from the center of the wheel to the fender. The most accurate way to do this is with a tape measure, but you can also use a ruler or a level. Once you have the measurement, you can add or remove preload to adjust the height of the coilovers.
5 Steps to Measure Coilover Height
There are a few different ways to measure coilover height, but the most common is to use a tape measure. You’ll want to measure from the top of the coilover (where it mounts to the vehicle) to the center of the wheel.
It is important to learn how to measure coilover height because it allows you to ensure that your vehicle’s suspension is properly set up. Suspension components can settle over time, so it is important to periodically check and adjust their height. Measuring coilover height is relatively simple and only requires a few tools. By taking the time to learn how to do this, you can keep your vehicle’s suspension performing at its best.
Step 1: The Height Of A Coilover System Can Be Adjusted To Suit The Needs Of The Driver
To measure the height of a coilover system, first determine the desired ride height. Then, measure the distance from the bottom of the wheel to the top of the fender. Subtract the desired ride height from this measurement to get the coilover height.
Step 2: Coilover Height Can Be Adjusted By Turning A Dial Or A Knob On The Shock Body
To measure coilover height, start by raising the vehicle so that the wheel is off the ground. Next, measure from the center of the wheel to the top of the fender. Finally, subtract the wheel diameter from this measurement to get the coilover height.
Step 3: The Height Of The Coilover Can Also Be Adjusted By Changing The Position Of The Spring On The Shock
To measure coilover height, start by measuring from the center of the wheel to the fender. Then, measure from the ground to the top of the wheel well. Subtract the second measurement from the first to get the coilover height.
Step 4: Many Coilover Systems Come With Adjustable Camber Plates, Which Also Allows For Adjustment Of The Caster And Toe
To measure the coilover height, first take off the wheel and then loosen the bolts on the bottom of the coilover. Next, use a tape measure to measure from the bottom of the wheel well to the top of the coilover. Be sure to write down this measurement so you can compare it to the other side. Finally, adjust the coilover height so that it is level with the other side.
Step 5: Some Coilover Systems Offer A Ride Height Locking Mechanism, Which Prevents
To measure the coilover height, first loosen the locking mechanism (if your system has one). Next, measure from the center of the wheel to the top of the fender. Finally, adjust the coilover until it is at the desired height, and then tighten the locking mechanism.
Frequently Asked Questions
How Do You Measure Coilover Length?
There are a few ways to measure coilover length. One way is to measure from the top of the coilover to the bottom of the shock body. Another way is to measure from the center of the coilover to the shock body.
Where Do You Measure Coilovers?
When measuring coilovers, you want to measure the length of the shock, from the bottom of the shock to the top of the shock, and the width of the shock.
In Summary
There are a few ways to measure coilover height, but the most common is to measure the distance from the center of the spring to the top of the shock absorber. This measurement can vary depending on the type of coilover and the suspension setup, so it’s important to check with the manufacturer to get the correct measurement.
