Skip to content

How To Fix A Bent Radiator Support

If your car has been in a minor collision, it’s possible that the radiator support has been bent. This can cause problems with the radiator cooling and can also lead to alignment issues. To fix a bent radiator support, you’ll need to jack up the car and remove the radiator. Once the radiator is out, you can use a pry bar to gently bend the support back into place. You’ll then need to reinstall the radiator and check for any other damage.

4 Steps to Fix A Bent Radiator Support

The radiator support is a metal frame that holds the radiator in place. If this frame becomes bent, it can cause the radiator to leak. To fix a bent radiator support, you will need to remove the radiator and then use a hammer to straighten the frame. Once the frame is straight, you can then reinstall the radiator.

A bent radiator support can cause a number of problems with your car. It can cause the radiator to leak, the engine to overheat, and the car to overheat. Learning how to fix a bent radiator support can save you a lot of time and money.

Step 1: Check The Radiator Support For Damage

If the radiator support is damaged, it will need to be replaced. To do this, first remove the radiator and then the radiator support. Next, install the new radiator support and then the new radiator.

Step 2: If Damage Is Found, Use A Hammer And Chisel To Remove The Damaged Area

First, locate the damaged area on the radiator support. Next, use a hammer and chisel to remove the damaged area. Finally, use a file or sandpaper to smooth out the edges of the repair.

Step 3: Use A Welder To Weld A New Piece Onto The Support

Welding is a process of using extreme heat to melt two pieces of metal together. In this case, you would use a welder to attach a new piece of metal onto the support of the radiator. This process requires a lot of precision and should be done by a professional if you are not confident in your own abilities.

Step 4: Check The Support For Proper Alignment And Weld The New Piece Into Place

Using a pry bar, carefully check the support for proper alignment and weld the new piece into place. This will help to ensure that the radiator support is properly secured and will not become bent again in the future.

Frequently Asked Questions

Can You Drive With A Broken Radiator Support?

It is possible to drive with a broken radiator support, but it is not advisable. The car may overheat and the radiator may fall out.

Can Radiator Support Be Repaired?

Yes, radiator support can be repaired with the correct tools and materials.

How Much Does It Cost To Fix Radiator Support?

The radiator support is a metal frame that the radiator is mounted to. It is usually made of steel and is bolted to the car. The cost to fix a radiator support can vary depending on the make and model of the car, but it can range from $100 to $300.


When the radiator support is bent, it’s important to try to fix it as soon as possible. This is because the longer it’s bent, the more likely it is that the radiator will leak. There are a few ways to fix a bent radiator support, but the best way to do it is to use a crowbar.

Leave a Reply

Your email address will not be published. Required fields are marked *