Skip to content

How To Rebuild Cv Axle

If a CV axle is ever damaged, it will need to be replaced in order to keep the vehicle it is a part of safe. Fortunately, this is a relatively easy process that can be done at home with the right tools. This guide will show you how to rebuild a CV axle step-by-step so that you can get back on the road as soon as possible.

1 Steps to Rebuild Cv Axle

If a CV axle becomes damaged, it will need to be replaced. The first step is to remove the old axle. This can be done by disconnecting the CV joint at the wheel end and then removing the axle shaft from the transmission. Once the old axle is out, the new one can be installed. The CV joint will need to be reconnected at the wheel end, and then the axle shaft can be inserted into the transmission. Finally, the nut and bolts can be tightened to secure the axle in place.

It is important to learn how to rebuild a CV axle because it is a common repair that is needed on many vehicles. It is a relatively simple repair that can be done at home with the proper tools and instructions. Learning how to rebuild a CV axle can save you time and money by avoiding the need to take your vehicle to a mechanic.

Step 1: Remove Wheel Remove Hubcap Remove Brake Drum Remove Axle Nut Use A Breaker Bar To Remove Axle Pull Axle Out Of The Car Clean The Axle Shaft Apply A Light Coat Of Grease To The Axle Shaft Insert The Axle Back Into The Car Place The Brake Drum Back On Replace The Axle Nut Replace The Hubcap Replace The Wheel Tighten The Axle Nut

To rebuild a CV axle, you’ll need to remove the wheel, hubcap, brake drum, and axle nut. Use a breaker bar to remove the axle, then pull it out of the car. Clean the axle shaft and apply a light coat of grease to it. Insert the axle back into the car, then place the brake drum back on. Replace the axle nut and hubcap, and then replace the wheel. Finally, tighten the axle nut.

Frequently Asked Questions

Can Cv Joints Be Reconditioned?

CV joints can be reconditioned and very often they are. The process of reconditioning them is usually not very expensive, and it can be a great way to extend the life of your car.

Can I Rebuild My Cv Axle?

CV axles are relatively easy to rebuild and most auto parts stores will carry the necessary components. The procedure is straightforward and can be completed with basic tools.

In Summary

Replace the axle on your car with a new one. This is a fairly easy process that can be done with simple tools. First, remove the old axle by taking out the bolts that hold it in place. Slide the new axle into place and replace the bolts. Tighten the bolts to specs and you’re done!

Leave a Reply

Your email address will not be published. Required fields are marked *