Skip to content

How To Install A Powered Subwoofer To A Factory Stereo

If you want to add some extra bass to your factory car stereo, you can do so by installing a powered subwoofer. This will require some extra work, but it is not too difficult and can be done in a few hours. Here are the steps you need to take: 1. Find a suitable location for the subwoofer. You will need to have enough space for the subwoofer itself, as well as room to run wires and make connections. 2. Disconnect the battery to avoid any accidents. 3. Run the power wire from the battery to the location of the subwoofer. You will need to use a wire with a gauge that is appropriate for the amount of power the

4 Steps to Install A Powered Subwoofer To A Factory Stereo

Adding a powered subwoofer to a factory stereo is a great way to improve the sound quality of your car’s audio system. Start by finding a suitable location for the subwoofer in your vehicle. Then, use a drill to make two holes in the floorboard so you can run the power and ground wires from the subwoofer to the battery. Finally, use screws or zip ties to secure the subwoofer in place.

In today’s world, having a powered subwoofer installed in your factory stereo can be a great asset. Not only does it add an extra layer of sound to your music, but it can also help boost the overall quality of your audio experience. Additionally, if you are someone who likes to listen to their music at high volumes, a powered subwoofer can help prevent your factory stereo from being overworked and potentially damaging your speakers.

Step 1: Find A Powered Subwoofer That Fits The Factory Stereo Opening

Find a powered subwoofer that fits the factory stereo opening. Most subwoofers are 10 inches in diameter, so finding one to fit the factory opening should not be difficult. Make sure that the subwoofer you choose has RCA inputs, as this will make it easier to connect to the factory stereo.

Step 2: Attach The Powered Subwoofer To The Factory Stereo

To install a powered subwoofer to a factory stereo, first disconnect the negative battery terminal to prevent any shorts. Next, remove the factory stereo and brackets. Then, using the provided template or measurements, mark and drill holes for the subwoofer’s enclosures. Finally, connect the subwoofer’s enclosure to the factory stereo’s speaker wire harness and secure the subwoofer in place.

Step 3: Connect The Power Cord To A Power Outlet

Connect the power cord to a power outlet. Make sure the outlet is working by plugging in something else to it. If it is not working, check your circuit breaker.

Step 4: Turn On The Powered Subwoofer

If your car stereo has an extra set of output jacks on the back, then it’s probably possible to add a powered subwoofer. To do this, first, find an unused set of wires behind the stereo (usually a pair of blue wires). Next, twist these wires around the matching wires on the subwoofer’s power wire harness. Finally, twist on a wire connector to each set of wires.

Frequently Asked Questions

What Do You Need To Install Subs On A Factory Radio?

In order to install subs on a factory radio, you will need an amplifier, wiring kit, and subwoofers. The amplifier will power the subwoofers, and the wiring kit will provide the necessary wiring to connect the amplifier to the factory radio.

Can You Connect A Subwoofer To A Factory Stereo?

You can connect a subwoofer to a factory stereo by using an RCA adapter.

To Review

A powered subwoofer can be easily installed to a factory stereo by following these simple steps. First, disconnect the negative battery terminal. Next, remove the cover from the factory stereo and remove the screws that hold it in place. Locate the amplifier and remove the screws that hold it in place. Disconnect the wires and remove the amplifier. Finally, connect the subwoofer’s power wire to the amplifier’s power wire and connect the speaker wire to the amplifier’s speaker wire. Replace the amplifier and screws and reconnect the battery.

Leave a Reply

Your email address will not be published. Required fields are marked *